Kenmore Washer Error Code F2 E3 — Cycle Interrupted / Power Loss During Cycle
What this means
The F2 E3 error code on Kenmore washers indicates the control board detected a power interruption or unexpected reset while a wash cycle was in progress. When power is restored, the washer displays this code instead of resuming. Common causes include a tripped breaker, a loose plug, a momentary power outage, or an intermittent wiring fault.
Alternate codes: F2E3
Step-by-step fix
3 stepsRestart the cycle
Press Cancel/Power to clear the error. Select a new cycle and press Start. The washer should resume normal operation.
If there is still water and clothes in the tub, select a Drain & Spin cycle first to remove the water.
Check the power connection
Ensure the washer plug is firmly seated in the wall outlet. Check that the circuit breaker is not tripped. Avoid using extension cords with the washer.
A loose-fitting outlet can cause intermittent power loss. If the plug slides out easily, the outlet needs replacement.
Check for recurring power issues
If this error happens repeatedly, there may be a wiring issue. Check the power cord for damage. Have an electrician verify the outlet and circuit if problems persist.
Consider using a surge protector with power loss indication to identify if the outlet is losing power intermittently.
When to call a professional
If the error occurs repeatedly without any known power outages, an electrician should check the outlet circuit and the washer's power cord connections.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
No replacement parts typically needed for this fix.
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.