Kenmore Washing Machine Error Code F2 E1 — Stuck Key / Button
What this means
Error F2 E1 indicates the control board detects a key on the user interface that is stuck. This can be caused by physical button damage, moisture behind the panel, or a faulty membrane switch. The washer will not start new cycles while this error is active.
Alternate codes: F2E1
Step-by-step fix
4 stepsPress all buttons
Firmly press each button on the panel to free any that may be stuck.
Clean the control panel
Wipe with a slightly damp cloth to remove any detergent or moisture buildup around the buttons.
Power cycle
Unplug for 5 minutes and try again.
Replace the user interface
If the error persists, the user interface control assembly may need replacement.
When to call a professional
If the user interface board needs replacement, professional service is recommended.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.