Kenmore Washer Error Code F0 E2 — Excess Suds Detected
What this means
The F0 E2 error code on Kenmore washers indicates the control board has detected excessive suds in the drum. The machine extends the rinse cycle and may pause to allow suds to dissipate. Using too much detergent, the wrong type of detergent (non-HE in an HE washer), or a drain restriction that prevents proper water removal can trigger this code.
Alternate codes: F0E2
Step-by-step fix
3 stepsLet the washer finish its extended rinse
The washer will attempt to rinse away excess suds automatically with additional rinse cycles. Allow it to complete. This may take 15–30 minutes longer than normal.
Do not open the door during the suds clearing cycle — this interrupts the process.
Reduce detergent in future loads
Use less detergent in the next load. For HE (High Efficiency) washers, use only HE-rated detergent and follow the recommended amount (usually 1–2 tablespoons). Do not fill the dispenser cap above the marked line.
Soft water requires even less detergent than hard water. If you have a water softener, reduce detergent by 25–50%.
Run a clean cycle
Run an empty hot water cycle with no detergent (or use a washing machine cleaner tablet) to flush residual suds and detergent buildup from the system.
Monthly cleaning cycles help prevent suds buildup and keep the washer fresh.
When to call a professional
If the suds error appears even when using the correct amount of HE detergent, there may be a drain restriction preventing proper water removal. Check the drain hose and pump filter.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
No replacement parts typically needed for this fix.
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.