Kenmore Oven Error Code F6 — Keypad/Membrane Switch Error
What this means
The F6 error code on Kenmore ovens indicates one or more buttons on the control panel keypad are stuck in the pressed position. This can be caused by a spill that seeped behind the membrane overlay, a worn overlay with failing contact pads, or physical damage to the panel. The oven may behave erratically or not accept input.
Step-by-step fix
3 stepsPower cycle and test buttons
Turn off the circuit breaker for 2 minutes. Restore power and press each button individually to see if the error clears and normal operation resumes.
A single stuck button can trigger the error. Press firmly around the edges of each button to free any that may be sticking.
Check for moisture or spills
Inspect the control panel for signs of liquid spills, grease, or moisture. If liquid seeped behind the membrane, it can create phantom key presses.
Clean the panel surface gently with a damp cloth. Never spray cleaner directly on the panel — the liquid can seep behind the membrane.
Replace the control panel overlay
If the error persists, the membrane overlay (keypad) needs replacement. Remove the control panel end caps and screws. Carefully peel off the old overlay and install the new one.
On some Kenmore models, the overlay and control board are sold as a combined unit.
When to call a professional
If the overlay replacement does not fix the issue, the control board's key matrix circuit may be damaged.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.