Kenmore Oven Error Code F10 — Runaway Temperature / Overheating
What this means
Error F10 is a critical safety code indicating the oven temperature has exceeded safe limits (over 600°F outside of self-clean mode). This is typically caused by a faulty temperature sensor, a stuck relay on the control board that keeps the heating element on, or a shorted heating element.
Step-by-step fix
4 stepsTurn off the oven immediately
Turn off the circuit breaker. Do not use the oven until repaired.
An overheating oven is a fire hazard.
Test the temperature sensor
Once cool, test the oven temperature sensor for ~1,080 ohms at room temperature.
Check the sensor wiring
Inspect wiring from the sensor to the control board for damage.
Check the control board
If the sensor is fine, the bake or broil relay on the control board may be stuck closed, keeping the element on continuously.
When to call a professional
Overheating is a safety hazard. Professional diagnosis is recommended to determine if the sensor or control board has failed.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.