PF

Haier Washer Error Code PF — Power Failure (Low Voltage)

Moderate Repair 10–30 minutes Tools: Multimeter or voltage tester, Flashlight

What this means

Error code PF on Haier washers indicates the incoming voltage has dropped below approximately 93 volts AC, which is too low for the machine to operate safely. This can occur during a brownout, if the home's electrical circuit is overloaded, if the power cord is damaged, or if the outlet has a loose connection. The washer will stop mid-cycle to protect its electronic components from damage caused by undervoltage conditions.

Alternate codes: pF

Step-by-step fix

3 steps
1

Check for a power outage or brownout

Look at other appliances and lights in your home. If lights are dim or flickering, you are experiencing a brownout. Wait for power to stabilize, then restart the washer.

During a brownout, unplug sensitive electronics (including the washer) to protect them from voltage spikes when power returns to normal.

2

Test the outlet voltage

Using a multimeter or voltage tester, measure the voltage at the wall outlet. A standard US outlet should read 110–125 volts AC. Below 100V indicates a wiring problem or overloaded circuit.

Do not share the washer's circuit with other high-draw appliances like space heaters or hair dryers.

3

Inspect the power cord and outlet

Check the washer's power cord for damage, fraying, or loose connection at the plug. Ensure the wall outlet prongs grip the plug firmly. A loose outlet connection can cause voltage drops under load.

If the outlet feels warm to the touch or the plug is loose, have an electrician replace the outlet.

When to call a professional

If the outlet voltage is consistently low throughout your home, contact an electrician. If the voltage is normal but PF keeps appearing, the washer's power supply board may be faulty — contact a Haier service technician.

Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.

Learn more about our sources

Parts you may need

Power Cord

Part #WD-3550-08 · $15–$30

If cord is frayed or damaged

Find Part

Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.

Quick Info

BrandHaier
ApplianceWasher
Error CodePF
DifficultyModerate Repair
Est. Time10–30 minutes