Haier Washer Error Code dO — Lid/Door Open
What this means
Error code dO on Haier washers (particularly portable and top-load models) indicates the lid switch senses that the lid or door is open. The washer will not operate with the lid open as a safety precaution — the drum could cause injury during spin. This is typically a straightforward issue: the lid is actually open, the lid switch has failed, or the lid hinge has sagged preventing full closure. On portable Haier washers (HLP series), the lid switch is particularly prone to failure.
Alternate codes: DO, do
Step-by-step fix
3 stepsClose the lid properly
Lift the lid fully open and close it firmly. Listen for the click of the lid switch engaging. On portable models, the lid must be pressed down until it is flush with the top of the machine.
Check that nothing is sitting on top of the washer that prevents the lid from closing fully.
Test the lid switch
If the lid is fully closed but dO persists, the lid switch may have failed. Unplug the washer, access the switch under the top panel, disconnect it, and test with a multimeter. Should show continuity when pressed (lid closed).
On Haier portable washers, the lid switch is a small magnetic reed switch. A weakened magnet in the lid can also cause dO.
Replace the lid switch
If the switch fails the continuity test, replace it with the correct part for your model. Remove the old switch, install the new one, reconnect wiring, and test.
Ensure the new switch is aligned correctly with the lid magnet (on magnetic switch models).
When to call a professional
The dO code is typically a simple fix. Call a pro only if the switch and wiring test good but the error persists, suggesting a control board issue.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.