Haier Refrigerator Error Code E6 — Refrigerator Fan Motor Error
What this means
Error code E6 on Haier refrigerators indicates the refrigerator compartment fan motor has failed or is operating abnormally. Some Haier models have a separate fan for the fresh food section in addition to the main evaporator fan. When this fan fails, the refrigerator compartment will not receive adequate cold air even though the freezer may still cool normally. Causes include a seized motor, blocked fan blade, wiring fault, or control board issue.
Step-by-step fix
3 stepsCheck for blocked airflow
Open the refrigerator and check if food items are blocking the air vents or fan grille inside the compartment. Rearrange items to ensure clear airflow paths.
On some Haier models, the refrigerator fan is behind a panel at the back of the fresh food section.
Listen for the fan
Close the door and listen for the fan running. If you hear nothing, or grinding/clicking noises, the fan motor may have failed.
The fan may cycle on and off based on temperature — wait several minutes before concluding it is not running.
Test and replace the fan motor
Unplug the fridge, remove the back panel inside the refrigerator compartment, access the fan, and test the motor windings with a multimeter (200–800 ohms expected). Replace if OL or if the blade does not spin freely.
Some fans have a small ice shield — reinstall it after the repair to prevent future ice-related blockages.
When to call a professional
If the fan motor tests good but E6 persists, the control board's fan output circuit may be faulty. A technician can verify board function.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Refrigerator Compartment Fan Motor
Part #RF-4550-55 · $20–$40
If motor reads OL or blade is seized
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.