What does Haier dryer error code E08 mean?

E08 means the drum is not rotating properly. Try spinning it by hand — no resistance means a broken belt, no movement means a jam. Check the drive belt, drum rollers, front glides, and look for foreign objects lodged between the drum and cabinet.

E08

Haier Dryer Error Code E08 — Drum Rotation Error

Moderate Repair 20–45 minutes Tools: Phillips screwdriver, Nut driver (1/4 and 5/16-inch), Flashlight

What this means

Error code E08 on Haier dryers indicates the control board detected the drum is not turning or is turning at an abnormal speed. The board uses motor current sensing or a belt switch to monitor drum rotation. Causes include a broken drive belt, a jammed drum (foreign object caught between drum and housing), worn drum support rollers, a seized idler pulley, or a motor issue. This is distinct from E03 (motor fault) because E08 specifically relates to drum rotation rather than motor operation.

Alternate codes: Err8, E8

Step-by-step fix

4 steps

Try spinning the drum by hand

Open the dryer door and try rotating the drum by hand. It should turn with moderate resistance from the belt. If it spins very freely (no resistance), the belt is broken. If it will not turn at all, something is jamming it.

A slight squeaking or rumbling when turning by hand indicates worn drum rollers or glides.

Check the drive belt

Unplug the dryer and remove the front or top panel to inspect the belt. A broken belt is the most common cause of E08. Check for the belt around the drum — if it has snapped, it will be sitting at the bottom of the cabinet.

Before installing a new belt, check the idler pulley for smooth rotation. A seized idler will break a new belt quickly.

Inspect drum rollers and glides

With the front panel removed, check the drum support rollers (usually two at the rear) and the front drum glides. Worn rollers will be flat-spotted or wobbly. Worn glides will have visible grooves.

Always replace drum rollers in pairs, even if only one appears worn. Mismatched rollers cause uneven drum rotation.

Check for foreign objects

Look in the gap between the drum and the cabinet housing for objects that may have fallen through. Coins, buttons, underwire from bras, and small toys are common culprits that can jam the drum.

Use a flashlight and look along the front and rear drum seals where items commonly lodge.

When to call a professional

If the belt, rollers, and drum are all in good condition but E08 persists, the motor or control board may need diagnosis by a professional.

Related error codes

Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.

Learn more about our sources