GE Washer Error Code E2 — Drain Error
What this means
The E2 error on GE washers means the drain pump was unable to empty the tub within the allotted time. Standing water remains in the drum. This is usually caused by a clogged drain filter, kinked drain hose, or blocked drain pump.
Step-by-step fix
3 stepsClean the drain pump filter
Locate the drain pump filter access (lower front of machine). Place towels and a pan below. Slowly open and drain water. Remove the filter and clear debris.
Clean this filter monthly to prevent drainage issues.
Check the drain hose
Inspect the drain hose for kinks or blockages. Make sure it's not pushed more than 8 inches into the standpipe.
The drain hose should be between 30–96 inches above the floor at the connection point.
Test the drain pump
Run a drain cycle and listen. Humming but no water flow = pump jammed. No sound = pump motor failed.
A coin or small object can jam the pump impeller.
When to call a professional
If the drain pump motor has failed, it needs replacement.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.