Frigidaire Oven Error Code F14 — Electronic Control Board (EOC) Failure
What this means
The F14 error on Frigidaire ovens indicates the EOC board has detected an internal failure — typically a corrupted EEPROM, failed relay, or damaged component. Unlike sensor-related codes, F14 points directly at the control board. The oven will not operate until the board is replaced or the error is cleared.
Step-by-step fix
3 stepsAttempt a reset
Turn off the circuit breaker for 5 minutes, then restore power. If F14 was triggered by a power surge, a reset may restore the board to normal operation.
Try this up to 3 times. Some boards recover after the EEPROM re-initializes.
Inspect the board for visible damage
Disconnect power. Remove the rear panel from the control area. Examine the EOC board for burnt components, bulging capacitors, or discolored solder joints.
A burnt smell from the control area is a strong indicator of board failure.
Replace the EOC board
If resets do not work, replace the board. Disconnect all wire connectors (labeling each one), remove the mounting screws, and install the new board. Reconnect all wires in the correct positions.
Match your exact model number when ordering — EOC boards are model-specific and not interchangeable between all Frigidaire ovens.
When to call a professional
If you are not comfortable working with the oven's 240V wiring, have a technician replace the board.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Electronic Oven Control (EOC) Board
Part #316560127 · $150–$300
Required if resets do not clear the error
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.