Electrolux Oven Error Code F2 — Oven Over-Temperature Condition
What this means
The F2 error code on Electrolux ovens indicates the oven temperature has risen above the safe threshold during a normal cooking cycle (typically above 600 degrees Fahrenheit during baking). The control board shuts off the heating element as a safety measure. Causes include a shorted temperature sensor, a stuck-on heating element relay, or a faulty control board. This is a safety-critical code.
Step-by-step fix
4 stepsTurn off the oven immediately
Press Cancel. If the heating does not stop, turn off the circuit breaker. Open the oven door carefully to allow heat to dissipate. Wait at least 30 minutes for the oven to cool.
Keep children and pets away from the oven while it is overheated.
Test the oven temperature sensor
Once cooled, turn off the breaker. Disconnect the temperature sensor wires at the back of the oven. Test resistance: at room temperature, the sensor should read about 1,080 to 1,100 ohms. A reading of 0 ohms indicates a short circuit that would cause the board to lose accurate temperature tracking.
If the sensor is shorted, the board may read the oven as cold and keep heating indefinitely.
Check the heating elements
Inspect the bake and broil elements for visible damage — holes, blisters, or bright spots. A damaged element can arc and stay on. Also check if the correct element activated (bake during bake mode, broil during broil mode). If the wrong element is on, the control board relay is misfiring.
If both elements come on simultaneously during a normal bake cycle, the control board is definitely faulty.
Replace the faulty component
Replace the temperature sensor if shorted. If the sensor is fine and the oven still overheats, the control board's heating relay is likely stuck — replace the control board.
After repair, verify oven accuracy with a standalone oven thermometer at 350 degrees.
When to call a professional
Overheating ovens are a fire risk. If you cannot identify the cause, have a professional diagnose and repair the issue before using the oven again.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Oven Temperature Sensor
Part #316490001 · $12–$25
If the sensor reads near 0 ohms (shorted)
Electronic Oven Control Board
Part #316576601 · $150–$300
If the heating relay is stuck and the oven overheats with a good sensor
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.