SE

Electrolux Microwave Error Code SE — Sensor/Keypad Error

Moderate 15–35 minutes Tools: Phillips screwdriver, Torx screwdriver

What this means

The SE error code on Electrolux microwaves indicates the control board is detecting a continuously pressed key on the touchpad or a sensor input that is out of range. This can be caused by a faulty membrane touchpad, moisture behind the touchpad, a stuck button, or a failed control board. The microwave may not respond to button presses or may beep continuously.

Alternate codes: S E, SE error

Step-by-step fix

4 steps
1

Reset the microwave

Unplug the microwave or turn off its circuit breaker for 3 minutes. Plug it back in. If the SE code was caused by a power glitch or temporary touchpad issue, it may clear.

For built-in or over-the-range models, the breaker is the easiest way to reset.

2

Check for stuck buttons

Press each button on the touchpad and make sure each one feels normal and springs back when released. Clean the touchpad surface with a slightly damp cloth to remove any residue that might be causing false presses.

Steam and grease from cooking below (especially on over-the-range models) can seep behind the touchpad.

3

Disconnect the touchpad ribbon cable

If the code persists after cleaning, remove the outer cover to access the control board. Disconnect the touchpad ribbon cable from the board. If the SE code clears, the touchpad is faulty. If it remains, the board is the issue.

CAUTION: Microwave capacitors can hold a lethal charge. If you are not experienced, do NOT open the microwave — call a professional.

4

Replace the faulty component

Replace the touchpad/membrane switch or the control board based on the diagnostic from the previous step.

On many Electrolux microwaves, the touchpad is a separate part from the control board and is less expensive.

When to call a professional

Microwave repair involves a high-voltage capacitor that can hold a lethal charge even when unplugged. Unless you are experienced with microwave repair, call a professional.

Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.

Learn more about our sources

Parts you may need

Touchpad/Membrane Switch

Part #5304491528 · $40–$90

If SE clears when touchpad is disconnected

Find Part

Control Board

Part #5304491529 · $80–$180

If SE persists with touchpad disconnected

Find Part

Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.

Quick Info

BrandElectrolux
ApplianceMicrowave
Error CodeSE
DifficultyModerate
Est. Time15–35 minutes