Bosch Dryer Error Code E10 — Control Module or Wiring Issue
What this means
Error E10 indicates a general control module fault or wiring issue. This can be triggered by loose wire harness connections, corrosion on connectors, or a failing main control board. Power surges and moisture exposure are common causes.
Step-by-step fix
4 stepsPower cycle
Unplug the dryer for 10 minutes to reset the control module.
Power surges during storms commonly trigger control board errors.
Check wiring connections
Remove the top or back panel and inspect all wire harness connections to the control board. Reseat any loose connectors.
Look for signs of corrosion or burn marks on connectors.
Inspect for moisture
Check for any signs of moisture or condensation near the control board. Moisture can cause short circuits.
Replace control board if needed
If connections are secure and the error persists, the control board may need replacement.
When to call a professional
If power cycling and checking connections does not resolve the issue, professional diagnosis is recommended.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.