Amana Washer Error Code F5 E3 — Lid Lock Not Engaged
What this means
The F5 E3 error on Amana washers means the control board detects the lid is not in the locked position. The lid switch may be defective, the lid may not be closing properly, or there may be a wiring issue between the lid lock and the control board. The washer will not agitate or spin for safety reasons.
Alternate codes: F5E3
Step-by-step fix
4 stepsEnsure the lid closes fully
Close the lid firmly and check that nothing is preventing it from latching. Look for warped lid edges or items sticking out of the drum.
Check the lid strike
Inspect the lid strike (the plastic tab on the lid that pushes into the lock). If it is broken or bent, the lock will not detect the lid as closed.
Lid strikes can crack over time, especially if the lid is slammed shut.
Test the lid lock switch
Unplug the washer, access the lid lock, and test the switch with a multimeter. The switch should show continuity when the lid is closed and locked.
Some models have a magnetic lid lock — ensure the magnet in the lid is not dislodged.
Replace the lid lock if faulty
If the switch fails the continuity test, replace the lid lock assembly. Disconnect the wire harness, remove the mounting screws, and install the replacement.
Test the new lock by running a short wash cycle.
When to call a professional
If a new lid lock does not resolve the error, the main control board may not be processing the lid lock signal correctly.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.