Amana Washer Error Code F1 E2 — Motor Control Board Error
What this means
Error code F1 E2 indicates the motor control unit (MCU) has an internal failure. The MCU controls the speed and direction of the drive motor. When this board fails, the motor may not start, may run at the wrong speed, or may not change direction between wash and spin.
Alternate codes: F1E2
Step-by-step fix
4 stepsPower cycle the washer
Unplug the washer for 5 minutes, then plug it back in and run a cycle. A temporary glitch or power surge can cause a false F1 E2 code.
Try running a drain/spin only cycle first — this is the simplest way to test motor function.
Check motor connections
Unplug the washer, remove the back or bottom panel, and check the wire harness connection from the motor control board to the motor. Reseat the connector.
A loose motor connector can look like a board failure to the control system.
Inspect the motor control board
Look at the motor control board for visible signs of failure: burnt components, swollen capacitors, or scorch marks on the circuit board.
The MCU is usually located near the bottom of the washer, close to the motor.
Replace the motor control board
If the board shows signs of failure or the error persists, replace the motor control unit.
Ensure the replacement board's part number matches your washer model — there are different versions.
When to call a professional
If replacing the MCU doesn't resolve the issue, the main drive motor may have failed and requires professional diagnosis.
Related error codes
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.