Amana Washer Error Code F0 E5 — Unbalanced Load Detected
What this means
Error code F0 E5 indicates the washer's load is too unbalanced to spin safely. The washer attempted to redistribute the load but was unable to achieve a balanced spin. This commonly occurs with single heavy items like blankets or when the load has bunched to one side.
Alternate codes: F0E5
Step-by-step fix
4 stepsRedistribute the load
Open the lid, rearrange the clothes evenly around the wash basket, and restart the cycle.
If washing a single heavy item (blanket, comforter), add a few towels to help balance the load.
Check for overloading
If the washer is packed too full, remove some items and run two smaller loads instead.
A good rule: clothes should fill the basket loosely, not be packed down.
Level the washer
Check that the washer is sitting level on the floor. An unlevel washer is more prone to unbalanced loads.
Place a level on top of the washer and adjust the feet until it's even.
Check the suspension system
If the washer frequently gives unbalanced errors with normal loads, the suspension rods or springs may be worn. Open the cabinet and check for broken or stretched suspension parts.
On top-load washers, suspension rods have dampers on them. If any rod is detached or a damper is broken, the washer will vibrate excessively.
When to call a professional
If the error occurs frequently with normal-sized loads, the suspension system or drive components may need professional inspection.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Suspension Rod Kit (4-pack)
Part #WPW10780048 · $20–$40
If suspension rods are worn or broken
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.