Amana Washer Error Code F0 E2 — Overloaded Washer
What this means
The F0 E2 error code indicates the washer has detected an excessive load weight that the motor cannot handle. The washer will stop to prevent damage to the motor, transmission, or suspension system. Reduce the load size and redistribute items evenly in the drum.
Alternate codes: F0E2
Step-by-step fix
4 stepsReduce the load size
Open the washer and remove some items. Heavy items like blankets, towels, and jeans should be washed in smaller batches.
The drum should never be packed tighter than 3/4 full.
Redistribute the remaining items
Spread the remaining clothes evenly around the drum to prevent an unbalanced load during spinning.
Mix large and small items together for better balance.
Restart the cycle
Close the lid or door and restart the wash cycle. The error should clear once the load is manageable.
Check suspension if error recurs with normal loads
If this code appears with normal-sized loads, the suspension rods (top-load) or shock absorbers (front-load) may be worn, causing excessive drum movement that triggers the overload sensor.
Worn suspension rods often cause loud banging during spin too.
When to call a professional
If the error persists with normal-sized loads, the suspension system or motor may need professional inspection.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.