Amana Dryer Error Code PF — Power Failure
What this means
The PF error code on Amana dryers indicates a power failure or interruption occurred while the dryer was running. This is typically caused by a brief power outage, a loose power cord connection, a tripped breaker, or a faulty wall outlet. The dryer stops to alert you that the cycle did not complete normally.
Alternate codes: Pf
Step-by-step fix
4 stepsPress Start to resume
Press the Start button to resume the drying cycle from where it stopped. The PF code is an informational alert, not a malfunction.
If you don't want to resume, press Cancel/Power to clear the code.
Check the power supply
Verify the dryer plug is firmly seated in the wall outlet. Check your home's circuit breaker panel to make sure the dryer breaker has not tripped.
Electric dryers use a 240V circuit with a double breaker — both poles must be on.
Test the wall outlet
If PF appears frequently without any known power outages, the outlet may have a loose connection. Try plugging a different appliance into the outlet to check for intermittent power loss.
Check the power cord connections
Unplug the dryer and inspect the power cord prongs for damage, scorch marks, or looseness. On the dryer end, remove the access panel and check the terminal block connections.
Loose terminal block connections are a fire hazard — tighten them securely.
When to call a professional
If the PF code appears repeatedly with no evidence of power outages, have an electrician check the outlet and home wiring for intermittent faults.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
3-Prong or 4-Prong Power Cord
Part #Universal · $15–$30
If cord prongs are damaged or scorched
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.