Amana Dryer Error Code F6 E2 — Communication Error Between Boards
What this means
The F6 E2 error indicates a communication failure between the main control board and the user interface (UI) board. This can be caused by a loose ribbon cable or wire harness between the boards, a faulty UI board, a faulty main board, or electrical interference. The dryer will be unresponsive when this code appears.
Alternate codes: F6E2
Step-by-step fix
4 stepsPower cycle the dryer
Unplug the dryer for 5 minutes, then plug it back in. A temporary communication glitch may clear with a reset.
Power surges can disrupt board communication temporarily.
Check the communication cable
Unplug the dryer and remove the control console. Locate the ribbon cable or wire harness connecting the UI board to the main control board. Disconnect and reconnect it firmly at both ends.
Look for bent pins, corrosion, or damage on the connectors.
Inspect both boards for damage
Examine the UI board and main control board for visible damage such as burnt components, corrosion, or cracked solder joints.
Replace the faulty board
If the cable is fine but the code persists, one of the boards has failed. The UI board is the more common failure — try replacing it first. If the code remains, replace the main control board.
Only replace one board at a time to identify which was the actual failure.
When to call a professional
If replacing both the cable and UI board does not resolve the issue, or if you are unsure which board is at fault, have a professional diagnose it.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.