Amana Dryer Error Code F2 E3 — Door Switch Fault
What this means
The F2 E3 error on Amana dryers means the door switch circuit is not responding as expected. Either the switch is stuck closed (indicating the door is always shut) or it won't close when the door is shut. The switch may be physically broken, the door may be misaligned, or the wiring to the switch may be damaged.
Alternate codes: F2E3
Step-by-step fix
4 stepsCheck the door alignment
Close the dryer door and verify it closes fully and the latch catches properly. Look for a warped door, bent hinges, or a worn door catch.
The door should close with a firm click.
Inspect the door strike
Check the door strike (the prong on the door that pushes the switch). If it is broken or bent, it may not activate the switch properly.
Test the door switch
Unplug the dryer. Access the door switch behind the front panel. Disconnect its wires and test with a multimeter — it should show continuity when pressed and no continuity when released.
Press the switch plunger by hand to simulate the door closing.
Replace the door switch
If the switch fails the continuity test, remove it from the front panel and install a replacement. Reconnect the wiring and test.
Door switches are inexpensive and easy to replace.
When to call a professional
If the door switch tests fine and the code persists, the control board may have a faulty input circuit.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.