Amana Dryer Error Code F2 E1 — Stuck Button on Control Panel
What this means
The F2 E1 error indicates the dryer's control panel detects a button being held for longer than expected. This is usually caused by a physically stuck button, moisture or residue under the panel overlay, or a faulty user interface board. The dryer will be unresponsive until the issue is resolved.
Alternate codes: F2E1
Step-by-step fix
4 stepsTry to free the stuck button
Press each button on the control panel firmly and release. Feel for any button that does not spring back properly.
Gently press around the edges of any suspect button to free it.
Clean the control panel
Wipe the control panel surface with a lightly damp cloth to remove residue that may be causing buttons to stick.
Do not spray cleaner directly on the panel — apply to the cloth first.
Power cycle the dryer
Unplug the dryer for 5 minutes, then plug it back in. If the code clears, the issue was temporary.
Replace the user interface board
If the code persists, the UI board behind the control panel may need replacement. Remove the control console, disconnect the board, and install the replacement.
Handle the ribbon cable connector carefully — it is delicate.
When to call a professional
If replacing the UI board does not resolve the code, the main control board may have a communication error requiring professional diagnosis.
Information compiled from manufacturer service manuals, official troubleshooting documentation, and appliance repair industry resources. This guide is for informational purposes only — always consult a qualified technician for complex repairs.
Learn more about our sourcesParts you may need
Links may earn us a commission at no extra cost to you. We only recommend parts relevant to this repair.